• default color
  • blue color
  • orange color
  • green color
CPanel
Home Projects Electrical Based Project ELECTRICAL PROJECT LIST

ELECTRICAL PROJECT LIST

E-mail Print PDF

ELECTRICAL PROJECT LIST

 

 

  • LASER COMMUNICATION+ CONTROL

Same as optical fiber + control expect laser.

 

  • MOBILE CONTROL ELECTRICAL APPLANCES:

In this project we show that how we control electrical appliances with the help of the mobile phone using DTMF technology.

 

  • MOBILE CONTROL ELECTRICAL+ PASSWORD + ACK:

Same as above + password protection for user + reverse acknowledgment for on/off.

 

  • MOBILE CONTROL ELECTRICAL+ PASSWORD + ACK + MEMORY

New advancement in the project+ data is to be store in the external memory to retain the data after power failure + firstly we check the position then we control the appliances.

 

  • ACCESS CONTROL DOOR OPENER + AUTO DIALER:

If we press a correct code then door is open, wrong produce a alarm and automatic switch on the telephone line and transfer a prerecorded voice message particular number using voice processor.

 

  • ACCESS CONTROL +GAS SENSOR + DOOR SENSOR + DOOR SENSOR + AUTO DIALER+ VOICE PROCESSOR:

Same as above+ two extra sensor for extra protection + auto dialer + 3 different transfer on the phone.

 

  • ACCESS CONTROL +MEMORY (EEPROM):

Enter the password, if the password is ok then door is open + changing password option + master password and user password.

 

  • MULTIUSER ACCESS CONTROL +MEMORY (EEPROM):

ADVANCE PROJECT: 5 USER+ 5 DIFFERENT PASSWORD + EVERY CHANGE ITS PASSWORD + ONE MASTER WITH PASSWORD + MASTER CAN ALSO CHANGE ANY ONE PASSWORD.

 

 

 

  • PRE-PAID ENERGY METER (GSM RECHARGE):

Pre-paid energy meter + memory (store the last date in power failure) + low balance alarm , easy recharge in rupees 10 or 20 maximum 255.

 

 

 

 

  • AUTOMATIC ROOM LIGHT CONTROLLER

Room light is automatic on if the single person the room. If no person in the room then light is off, count the total number of the person in the room using up down counter, infra red sensor.

 

  • ROOM LIGHT CONTROLLER WITH LIGHT VARIATION

Room light is automatic on if the single person the room. If one person in the room then one light is on, as the number of person added then room light is also increase in step, infra red sensor.

 

  • PHOTO-SENSTIVE ROOM WITH LIGHT VARIATION

Room light is depened on the lght available in the room, photosensitive sensor, gather the light, compare with the data base, control the light in 4 steps.

 

  • SMART PARKING CONTROL

Sense the car for entry, if space available then open the door, show the empty space on LCD if no space then display NO SPACE and door is not open. Parking monitor to show the parking status by L.E.D + 8 magnetic proximity sensor.

 

  • MULTI LEVEL PARKING LIFT

Two floor indication + auto check the space on each floor, if spaces available then move automatically to floor+ show the details on LCD.

 

  • RF ID ACCESS CONTROL SYSTEM

Using 433Mhz RF module and transmit the RF data in the air, data is to be receive by the receiver and compare with the data base, if match then display the name and demand a password , if the password is ok then open the door+  5 different password for 5 different person.

 

 

  • SMARTCARD CONTROL+ ATTENDENCE + MEMORY +RTC:

Hole base smart card + data + year + in time + out time store in the external memory + save the data base of 15 person.

 

.

  • 4 CHANNEL DISTRIBUTION CONTROL + RTC + MEMORY 

Control for different channel with time base control, data store in power failure also using RTC 8563 and 24C02 MEMORY.

 

  • DIGITAL CLOCK WITH REAL TIME CLOCK

In this digital clock we set the time for alarm + if power is fail then clock is off but time is running like computer real time clock+ we use RTC 8563 with controller to run the clock in power failure.

 

 

 

  • COLOUR SENSTIVE AUTO PICK ROBOTIC ARM:

Same as colour identifier + check the colour ball and through this colour ball is different basket.

 

  • ENERGY FROM BUSY ROAD + AUTOMATIC STREET LIGHT

Generate a voltage from the busy road traffic + save the voltage in the battery + now street light run by this battery and automatic switch on the night automatically.

 

  • MULTI CHANNEL INFRA RED CONTROL

Control multi electrical point using on infra red remote transmitter circuit. Transmitter transmit a different 8 bit codes every through infra red led . ln the receiver we use a proper receiver to receive the data using micro –Controller and control the 10 different electrical items automatically   

 

 

  • MULTI-CHANNEL INFRA RED CONTROL+2 LOAD

INTENSISTY CONTRL

Control multi electrical point using one infra red remote using micoro- controller in both side+ intensity control of two load using micro controller.

 

  • SPEED CONTROL OF THE DC MOTOR USING INFRA RED

REMOTE.

Speed control of dc motor using manual and remote control, seven segment display to show the Speed= clock wise and anticlock wise control  

 

 

  • DIGITAL FUEL METER

Show the level of liquid in the tank by floating valve+ show the total petrol+maximum distance is to be cover+ manual reserve setting+ alarm for reserve indication + MICROCONTROLLER INTERFACE+LCD DISPLAY..

 

 

  • TEMPERATURE CONTROL INCUBIMETER:

Set the maximum temperature for unit + temperature sensor sense the temperature and processor display on the LCD + external setting for maximum temperature + as temperature rises and reach to maximum point then load is off.

 

  • TEMPERATURE CONTROL FAN

Controller automatic control the speed of the fan as controller sense the temperature +4 step control + ADC + microcontroller + LCD.

 

  • SOUND POLLUTION CONTROL

Measure the sound and show this on LCD in db. If sound cross the set value then system is off. Very useful in public amplifier systems.

 

  • SOLOR SEEKER

In this project we design a system that follow the sun light. One photosensor is fitted on the surface. Photosensor follow the sun and move to the either direction.

.

 

 

  • IRRIGATION CONTROL SYSTEM

In the irrigation control system, we insert two probes in the field, check the moisture level of field. If the field is dry to compare set value then switch on the pump automatically.

 

  • BLIND STICK

Multi sensor input blind stick, light sensor + water sensor + temperature sensor.

 

  • TRAFFIC LIGHT WITH ADAPTIVE LOGIC

Traffic light with L.E.D on 4 side + Infra red sensor on two side + if traffic is dense then green light takes more time.

 

 

  • TRAFFIC LIGHT WITH COUNT DOWN TIMER

Traffic light with L.E.D on 4 side + count down timer on all side.

 

  • TRAFFIC LIGHT + COUNT DOWN TIMER + ADAPTIVE LOGIC

Traffic light with L.E.D on 4 side + count down timer on all side + Infra red sensor +time change on counter if traffic is dense.

 

  • AUTO PATH FINDER ROBOT:

In this project we show that we design a small robot for auto path finder. Two infra red sensor on left and right side + two slow speed sensor on left and right side + two slow speed motor + 8051 base microcontroller.

 

  •  AUTO PATH FINDER + ANTI FALLING ROBOT:

.               same as above + anti falling logic, if the robot sense the depth then robot stop automatically + auto back auto change its position.

 

  • INFRA RED ROVER + ROBOTIC ARM:

ROBOTIC ARM (THREE MOTOR) + BASE MOVEMENT (TWO MOTOR) CONTROL By the infra red remote.

 

  • GSM CONTROL ROBOTIC ARM

GSM CONTROL ROBOTIC + BASE MOVEMENT (TWO MOTOR) CONTROL By any mobile phone.

 

  • R.F CONTROL ROVER

ROBO is to be control by the RF module + encoder + decoder circuit.

 

  • AUTO REJECTION ROBOTIC ARM + CONVEYER BELT:

In this project we design a autonomous robotic arm, auto sense+ auto through the object from the conveyer belt to the any place.

 

  • PENCILE VENDING MACHINE:

Special machine to deliver a one pencil every time when we insert a one coin in the coin box.

 

  • COIN OPERATED TOLL BRIDGE:

Coin operated toll bridge + coin system+ slow speed motor , as we insert the coin in the system then motor open the door automatically and close automatically after some time.

 

  • TRAIN POSITION MONTORING SYSTEM (LIKE GPS)

In this project we monitor the position of the train by magnetic sensor and display the position on I.E.D PATTERN USING89C2051 microcontroller.

 

  • TRAIN POSITION MONTORING SYSTEM + AUTO CROSSING SYSTEM

In this project we not only monitor the train position but at the same time we close and open the crossing system automatically.

 

  • I.R CONTROL + RAILWAY CROSSING + LCD DISPLAY:

Auto crossing system + display the station name on LCD + movement of train is control by infra red rays on pole stand.

 

  • AUTO STOP + AUTO REVERSE SMALL METRO + DOOR OPENER

Small microcontroller based metro + stop on particular position by sensing a white line + auto reverse at the end of the track.

 

 

 

  • AUTO STOP + AUTO REVERSE + STATION NAME DISPLAY + ABS METRO

Small microcontroller based metro + stop on particular position by sensing a whit line +auto reverse after all station finished + anti collision system.

 

  • ANTI COLLISION SYSTEM USING TWO TRAIN ON ONE TRACK

Small microcontroller based metro + stop on particular position by sensing a whit line +auto reverse after all station finished + anti collision system.

 

  • P.C CONTROL ELETRICAL APPLIANCES;

In this project we show that how we control the electrical; appliances with the help of PC parallel port.

 

 

  • SPEED CONTROL OF DC MOTOR USING PC

In this project we control the speed of the dc motor using PWM technique.

 

  • CONTROL THE MOVEMENT OF THE METRO USING C++

In this project we design one wireless metro with display on the motor .with the help of the PC we control the movement of the metro.

 

  • PC CONTROL STEPPER MOTOR

Three stepper motor control direction + speed + steps + sequence control.

 

  • PC CONTROL WIRELESS MOTOR:

In this project we show that how we control the movement of the car using PC with RF transmitter.

 

  • PC CONTROL ROBOTIC ARM

In this project we show that how we control the movement of the robotic arm using c++.

 

  • PC CONTROL ANTENNA POSITIONING SYSTEM

In this project we show that how we control the position of the ANTENNA through pc. When antenna gets a signal then antenna stop automatically and display the result on the PC.

 

  • REGENERATIVE BRAKING SYSTEM

In this project we show that how we generate a valuable voltage with the help if the braking system.

 

  • ENERGY FROM BUSY ROAD + PHOTO SENSTIVE STREET

In this project we show that how we generate a valuable voltage with the help of the dynamo fitted on the speed breaker.

 

  • AUTOMATIC STREET LIGHT

In this project we show that how we control the street light in the dark light automatically.

 

  • AUTO BRAKING SYSTEM

In this project we show the concept of auto braking with infra red sensor system.

 

  • AUTO START, AUTO MOVE + AUTODISPATCH MATERIAL HANDLING LIFT

In this project we design the lift for material handling. As we place the object lift is start and move up words. Stop at the top and slide out the material on the top.

 

 

 

 

  • RAIN PROTECTOR:

In this project we design one conveyers belt logic with one crain sensor, as the rain is detected by the sensor then conveyer belt is on and keep all the cloth under the shelter automatically.

 

  • REGENERTIVE BRAKING SYSTEM
  • ENERGY THROUGH BUSY ROAD
  • PAPER CUTTING MACHINE
  • 3 MOTOR CONTROL ROBOTIC ARM
  • 3 +1 MOTOR BASED ROBOTIC ARM
  • INDUCTION BRAKING SYSTEM
  • AUTO OBJECT REJECTION AND AUTO PICKING SYSTEM
  • AUTO BRIL MECHNISM FOR WORK PIECE
  • MULITLEVEL PARKING LIFT
  • PENCIL VENDING MACHINE
  • MULTI TOFEE VENDING MACHINE
  • AUTO PATH FINDER ROBOTIC WITH TWO SENSOR
  • AUTO PATH FINDER + ANTI FALLING MECHANISM
  • AUTO BRAKING SYSTEM
  • AUTO BRAKING SYSTEM WITH AUTO PATH FINDER
  • GSM CONTROL ROBOTIC ARM
  • PC CONTROL WIRELESS CAR
  • PC CONTROL WIRELESS METRO
  • PC CONTROL UN-MANNED VEIHCLE PROGRAMMED
  • SPEED AUTO CONTROL MOVING PLATFORM
  • AUTO RALIWAY CROSSING MACHANISM
  • AUTO BRAKING OF TWO TRAIN
  • GPS SYSTEM IN TRAIN
  • MECHANIOCAL TOLL BRIDGE SYSTEM
  • AUTO STOP AUTO MOVE METTRIAL HANDLING TROLLY SYSTEM IN INDUSTRY
  • MEHANICAL WIND MILL SYSTEM
  • MULTI FLOOR LIFT SYSTEM
  • AUTO STARTS AUTO THROUGH MATERIAL HANDLING LIFT SYSTEM
  • MULTI CAHNNEL ELECTRICAL POINT CONTROL THROUGH INFRA RED CONTROL (20 FEET RANGE)
  • SPEED CONTROL OF TWO DIFFERENT LOAD THROUGH INFRA RED CONTROL (20 FEET RANGE)
  • SPEED CONTROL OF TWO LOAD + CONTROL OF 4 FOR DIFFERENT OBJECT THROUGH I.R REMOTE (20 FEET RANGE)
  • MOBILE IFFIGATION

(control of any electrical tube well pump with the help of mobile phone with unlimited range)

 

  • POWER SAVING CONCEPT THOROUGH PC

          (Control 4 different Point through pc and provide a control timing option)

  • SCHOLL BELL MANAGEMENT SYSTEM
  • COUNT DOWN TIMER

(set the numeric value on display and Start the switch when 0 Circuit is on/off automatically

  • ACCESS CONTROL DOOR OPENER

 (just enter the password wrong password protection, change password option, memory interface, LCD display, mechanical door)

  • ELECTRICAL DISTRIBIUTION CONTROL SYSTEM

                (control 4 different zone for time control electrical distribution system)

  • MULTI-FLOOR LIFT CONTROL FOR 4 DIFFERENT FLOOR (STEMPER MOTOR)
  • HOTEL POWER MANAGEMENT

                 control the power of different room with the help of the pc

  • TEMPRATURE CONTROL FOR SPA control the temperature level of spa room with hand-on Preset table control, maintain the temperature by cut off/on the unit 
  • TEMPRATURE SENSTIVE FAN.

                Speed is automatically control; using ADC; lm 335 and microcontroller system.

  • CURRENT CONTROL SYSTEM

(just Check the current level by current sensing coil, control the current flow,  display on LCD.

  • SOUND POLLUTION CONTROL

(Control the sound pollution of the sensing output and control the unit on/off as per the sound level)